Custom Wholesale Hooded Puffer Jacket Manufacturer | OEM Hooded Puffer Jacket factory
00Custom Wholesale Puffer — Specs & What You Can Customize
Six options you control on this puffer. Nothing here is a fixed spec — every line below is open on your puffer OEM and private-label program.
01OEM Custom Hooded Short Puffer — Design & Features
A short black hooded puffer with a padded stand-up collar, chunky YKK-style front zip, and elasticated cuffs — the streetwear winter layer built for fast wholesale cycles.
Short Block With Hood And Padded Collar
A 100% polyester pongee shell carries channel-quilted polyester padding, anchored by a padded stand-up collar and a 3-panel hood that moves with the head instead of bunching at the neck.
Clean front placket and elasticated ribbed cuffs keep the silhouette tight and short — the same block works as a winter layer over a hoodie or under a parka for deeper cold.
02OEM Custom Hooded Short Puffer — Detail Close-ups
The construction details that turn a wholesale puffer blank into a retail hooded winter layer.
Stand-Up Collar & Adjustable Hood
The stand-up collar pads out at the chin for warmth, and the 3-panel hood sits cleanly behind the head — toggles at the hem let a wearer draw the hood around the face on windy days.
A chunky full-zip front closure with a self-fabric pull reads as a brand detail at the placket, and elasticated ribbed cuffs seal in warmth at the wrist without a snap.
Side Zip Pockets & Inner Pocket
Both hand pockets sit on the side seam at hip height with self-colored zip closures, keeping phone and keys secure through cold-weather days.
Inside, a clean taffeta lining makes layering effortless, and an inner zip pocket keeps essentials flat against the body.
03OEM Custom Hooded Short Puffer — Material & Construction
The shell is a 100% polyester pongee that resists wind and light precipitation, channel-quilted over mid-loft polyester padding. We hold fill weight and quilt-channel spacing to tight tolerance so batch-to-batch warmth and drape stay consistent — the foundation of a retail-grade hooded puffer.
| Shell | 100% polyester pongee |
| Fill | Channel-quilted mid-loft polyester padding |
| Color | Black |
| Fit | Short regular |
| Closure | Full front zip with self-fabric pull |
| Cuffs | Elasticated ribbed |
| Hood | 3-panel with hem toggles |
Channel Quilting That Holds
Channel quilting keeps the fill evenly distributed from hem to shoulder, so the jacket holds its loft through repeat wear instead of drifting or clumping at the side seams.
04OEM Custom Hooded Short Puffer — Side-By-Side Comparison
Three ways to run a puffer jacket program — matched to silhouette, fill, and shell.
| Factor | Our OEM Hooded Puffer Jacket | Our Quilted Puffer (PF-07) | Our Padded Winter Puffer |
|---|---|---|---|
| Warmth & Fill | Mid-loft polyester padding, channel quilted, mid-winter city wear | Higher-loft down-alternative, deep winter | Heavy poly-fill baffles, deep cold |
| Hood & Collar | 3-panel hood + padded stand-up collar with hem toggles | Adjustable hood + stand collar | Stand collar only, no hood |
| Shell & Weather | Polyester pongee, wind-resistant, light rain sheds | Crinkle nylon, wind-resistant | Brushed polyester, dry cold only |
| Silhouette | Short regular, sits at hip for streetwear layering | Mid length, drop-shoulder streetwear | Longer casual block, full coverage |
| Pocket Program | Dual side-seam zip pockets + inner zip pocket | Dual side-seam zip + inner chest pocket | Two hand pockets, zip or snap |
| Detail Level | Mid-high — self-fabric zip pull, ribbed cuffs, taffeta lining | High — leather zip pull, ribbed cuffs, taffeta lining | High — woven label, storm placket |
Our puffer program gives your brand one OEM source across three specs — short hooded streetwear (PF-08), mid-length quilted (PF-07), and deep-winter padded — so a single factory carries your whole winter category with one branding standard.
05OEM Custom Hooded Short Puffer — Usage Scenarios
Where this layer lands across a wholesale brand’s season — from winter drops to travel and content shoots.
Winter Streetwear Drops
Short block, padded collar, and black palette carry a seasonal drop on its own — styled open over a hoodie or zipped to the chin.
Cold-Weather City Wear
The padded stand-up collar and adjustable hood seal out wind on commutes, while the short block layers cleanly over knitwear.
Boutique & Concept Stores
Mid-high detail level — chunky zip pull, ribbed cuffs, taffeta lining — keeps the same SKUs out of fast-fashion territory.
Travel & Weekend Trips
Mid-weight fill holds warmth without winter bulk, so the puffer packs for city breaks and weekend trips across cold destinations.
Après-Ski & Café Days
The black shell and clean placket read as a soft neutral off the mountain — the same jacket moves from outdoor stops to indoor settings.
Content & Product Photography
Matte black shell holds color under studio light, and the even quilting photographs cleanly in flat lays and on-figure shots.
06From Sampling to Bulk — OEM Puffer Production Timeline
Five checkpoints on your puffer, no black boxes. You approve at each stage before the next begins.
- 1Tech pack & quotation1–2 days. You send the pack or a reference jacket; we return a costed quote with fill power and baffle options.
- 2Fabric & trim sourcing3–5 days. Down-proof shell and down or fill are booked; GRS certificates for recycled options are prepared.
- 3Proto sample7–10 days. One jacket with confirmed fill weight per size and baffle construction for your sign-off.
- 4PP sample & fit freeze3–5 days. Fill weight and loft are verified and frozen before bulk cutting.
- 5Bulk production35–45 days. Down-proof sewing, baffle construction, 8-step inspection to AQL 1.5 and packing.
07Hooded Puffer Jacket Manufacturer (Wholesale & Private Label)
Answers to the questions wholesale and private-label buyers ask before ordering a custom puffer — fill power, down-proofing, certification and lead time.
What fill power and down ratio do you use?
Standard is 90/10 goose down at 650–750 fill power, or recycled polyester fill for GRS programs. Fill weight per size is confirmed on the PP sample so the loft matches your spec.
How do you stop down from leaking?
We use a down-proof woven shell with baffle-box or stitch-through construction, and tape or overlock the seams at stress points so feathers stay inside the chamber.
Can the puffer carry a GRS certificate?
Yes. Recycled shell and fill ship with GRS transaction certificates, and the recycled content ratio is stated on the document — useful for EU and brand compliance.
What hardware comes as standard?
YKK or SBS zippers with a branded pull, adjustable hem drawcord and a snap storm flap. Metal parts are salt-spray tested for corrosion resistance.
What is the MOQ and lead time for a custom puffer?
For your puffer: 100 pieces per style per colour. Proto sample in 7–10 days; bulk production 35–45 days after PP approval.
08Why Choose Us — Hooded Puffer Jacket Manufacturer
100 pcs MOQ
Low minimum per colour per style for OEM and private-label puffer programs.
7–10 Days Sampling
Your puffer proto sample in 7–10 days after fabric and trims are confirmed.
AQL 1.5
Inline and final inspections follow AQL 1.5 with a full QC report on every order.
35-45 Days Bulk
Bulk production in 35-45 days after PP sample sign-off, FOB Shenzhen.
Need a custom puffer program with your own fill, baffle, colour, hardware and labels? Send your tech pack or reference sample and we will quote within 24 hours.
Request a Quotation About Our FactoryMade in our Dongguan, China workshop with OEKO-TEX tested materials; BSCI (Grade B), GRS, ISO 9001 and OEKO-TEX 100 audits are shared before your first order.
- 加载中···
Start Your Custom Project
- Name
- Phone
- *Title
- *Content