Custom Wholesale Gray Heavyweight Oversized Hoodie Manufacturer | OEM Pullover Hoodie factory
01OEM Custom Gray Hoodie — Design & Features
A 380GSM heavyweight French Terry pullover hoodie built on an oversized drop-shoulder block — the unisex streetwear proportion that makes a wholesale blank read as a custom garment.
Oversized Drop-Shoulder Pullover Block
The 380GSM French Terry is cut on an oversized drop-shoulder block with a 5cm shoulder drop, retail-graded across S-XXL so the silhouette holds its line across the size run instead of bagging out at the XL.
The smooth face surface photographs cleanly under both natural and studio light, and the loop-back interior keeps the body comfortable for all-day wear between drop and after-hours.
02OEM Custom Gray Hoodie — Detail Close-ups
The construction details that separate a retail-grade hoodie from a blank.
Yarn-Dyed Heather-Tone Face
The gray tone is dyed at the yarn stage rather than as a surface print, which is what gives it its depth and keeps the color from washing out into a flat gray after a few home washes.
The smooth face photographs cleanly under both natural and studio light — a small but real consideration for product and content teams running flat lays and on-figure shoots.
Double-Ply Hood & Kangaroo Pocket
The hood is built double-ply in the same 380GSM French Terry, with coverstitched edges that hold their shape instead of curling at the neckline.
A single-piece kangaroo pocket panel is set into the front so the pocket reads as part of the body block — not as a separate add-on with a visible panel break.
03OEM Custom Gray Hoodie — Material & Construction
The 380GSM French Terry is knitted in our own mill, then mill-stage pre-shrunk before cutting. We hold the 80/20 cotton-poly blend to tight tolerance so batch-to-batch hand-feel and drape stay consistent — the foundation of a retail-grade gray pullover.
| Fabric | 380GSM French Terry |
| Composition | 80% Cotton / 20% Polyester |
| Color | Gray |
| Fit | Oversized Drop-Shoulder Pullover |
| Knit / Texture | Yarn-dyed gray, loop-back interior |
| Pre-Treatment | Mill-stage pre-shrunk, OEKO-TEX 100 trims |
Heavyweight Hand-Feel
The 380GSM yarn-dyed face and loop-back interior balance retail-grade drape with all-day comfort. The pre-shrunk fabric holds its oversized proportion through repeat commercial washing instead of pulling length.
04OEM Custom Gray Hoodie — Side-By-Side Comparison
Three ways to run a gray heavyweight pullover program — oversized, cropped, and zip pullover — so your buyers can match silhouette, hem length, and opening to season and channel.
| Factor | Our Oversized Pullover | Our Cropped Pullover | Our Pullover Zip |
|---|---|---|---|
| Opening & Ventilation | Pullover, opens at neckline only — mid ventilation, pull-on ease | Pullover, opens at neckline only — mid ventilation, pull-on, cropped fit | Full-zip pullover length, opens to hip hem — highest ventilation |
| Length & Silhouette | Oversized drop-shoulder block, hits below hip, retail-graded across S-XXL | Cropped boxy, hits at natural waist, drop-shoulder, retail-graded | Standard pullover length, hits at hip, relaxed straight block |
| Hood & Collar | Double-ply pullover hood, coverstitched, OEKO-TEX self-fabric drawcord | Double-ply cropped pullover hood, coverstitched, OEKO-TEX drawcord | Double-ply full-zip stand collar + hood, coverstitched, branded zip pull |
| Colorfastness | Grade 4-5 reactive dye, ISO 105-C06 verified, holds through 20+ commercial washes | Grade 4-5 reactive dye, same dye lot, holds through 20+ washes | Grade 4-5 reactive dye, ISO 105-C06, holds through 20+ washes |
| Layering Versatility | Low — fully closed pullover, sits under outerwear only | Medium — cropped length layers under or over pieces, sits at waistband | High — wears open over a tee or zipped as a jacket layer |
| Detail Level | High — woven label patch, coverstitch seams, OEKO-TEX drawcord | High — woven label, coverstitch seams, OEKO-TEX drawcord, cropped detail | High — branded zip pull, woven label, coverstitch seams, OEKO-TEX drawcord |
Our gray pullover program gives your brand one dye lot across three silhouettes — oversized for the streetwear drop, cropped for the summer-weight rotation, zip pullover for layering — so a single source covers three SKUs.
05OEM Custom Gray Hoodie — Usage Scenarios
Where the gray oversized pullover lands across a wholesale brand's rotation — from unisex streetwear drops to athleisure, travel, and content shoots.
Unisex Streetwear Drops
The oversized drop-shoulder block and unisex size run read as a clean streetwear silhouette under natural and studio light, so the hoodie drops straight into a seasonal release.
Layering Under Outerwear
The hood sits flat under chore coats, denim jackets, and parkas, and the ribbed hem tucks cleanly into mid- and high-rise bottoms without adding bulk.
Athleisure Off-Duty
Loop-back French Terry interior keeps the body comfortable during warm-up, cool-down, and the casual hour after the gym — the kind of piece that earns repeat wear between sessions.
Travel & Long Flights
The 80/20 cotton-poly blend resists wrinkles in a carry-on, and the pre-shrunk fabric keeps the oversized fit consistent across multi-day wear without losing shape.
Campus & Studio Wardrobe
Gray reads as a neutral in classrooms, design studios, and co-working spaces, so the hoodie drops into a rotation without clashing with branded or tailored pieces.
Content & Product Photography
The yarn-dyed gray tone holds color under strobes and continuous light, and the coverstitched construction photographs cleanly in both flat lays and on-figure shots.
06OEM Hoodie Manufacturer (Wholesale & Private Label)
Answers to the questions wholesale and private-label buyers ask before placing a custom order — OEM, low MOQ, and full-service branding built in.
What is your Minimum Order Quantity (MOQ) per style?
Our standard MOQ is 100 pieces per style per color for custom streetwear such as hoodies, sweatshirts, and jackets. For technical outerwear and complex constructions, the MOQ is usually 200 pieces per style per color due to cutting and seam-taping setup. Smaller pilot runs of 50 to 80 pieces can be negotiated for established partners or sampling-to-production programs.
How does your sampling process work, and are samples charged?
Sampling follows three simple steps: (1) share your design, tech pack, or reference garment; (2) we develop a proto sample using your specified fabric and trims within 7 to 10 days; (3) you review and request revisions. The first proto sample carries a nominal fee that is deductible from your bulk deposit. Bulk production starts only after you approve the final sample.
Can you add our logo by embroidery or printing (OEM/ODM)?
Yes. We provide full OEM/ODM branding: embroidery (flat or 3D puff), screen printing, DTG, heat transfer, and woven labels. Share your logo file (AI, PDF, or PNG) and preferred placement. A pre-production branding sample is included in the sampling stage so you can verify stitch density, color accuracy, and placement before the bulk run.
What quality control and AQL standard do you follow?
Every order passes a four-stage QC process: incoming fabric inspection, in-line checking during production, final random inspection, and packing audit. We inspect to AQL 2.5 (major) and 4.0 (minor) by default, aligned with international retail standards. A full inspection report with photos is shared before shipment, and stricter AQL levels can be arranged on request.
How do you make sure the garments don't shrink or lose shape after washing?
All of our French Terry, ribbed, and stretch-knit fabrics go through a professional pre-shrinking and fabric stabilization process before cutting. We control washing shrinkage strictly within international standards, ensuring your fits look perfect and maintain their structure even after multiple commercial machine washes.
07OEM Custom Gray Hoodie — Why Choose Us
A factory-direct OEM partner for brands that need retail-grade gray pullover hoodie built to spec — not stock surplus dressed up as custom.
Ready to spec your custom gray heavyweight oversized hoodie? Send your tech pack or reference garment — we develop your proto sample within 7 to 10 days.
About Our Factory
- 加载中···
Start Your Custom Project
- Name
- Phone
- *Title
- *Content