Custom Wholesale Brown Sherpa Jacket Manufacturer | OEM Brown Sherpa Jacket factory
| Share | |
|---|---|
| Categories | Sherpa & Polar Fleece Mid-Layers |
| Brand | Eation Outerwear - Heavyweight Hoodies & Padded Ja |
| Product Specifications | SP-01 |
| Fabric | High-pile sherpa fleece (polyester 100%) |
| Composition | 100% polyester sherpa boucle, 460 GSM |
| Color | Espresso Brown with off-white contrast piping |
| Min. Order | 100 pcs per color per style |
| Port | Shenzhen (FOB Shenzhen) |
| Payment | T/T 50% deposit, 50% before shipment |
| Packing | 1 pc / polybag, 10-20 pcs / export carton, or as per customer request |
00Custom Wholesale Sherpa — Specs & What You Can Customize
The six figures wholesale buyers ask for first. Every number below matches our published sourcing policy, so what you read here is what we quote.
Technical outerwear programs start at 200 pieces per style per colour because of cutting and seam-taping setup. Our Dongguan facility quotes bonded seams, certified finishes and heavyweight builds within the same tier.
Ten levers you control on this style. Nothing here is a fixed spec — every line below is open on OEM and private-label programs.
- Pile & weight — high-pile 460 GSM or short-pile boucle
- Contrast shell — sueded trim, nylon panel or flat fleece
- Colour — lab dips to Pantone, 3–5 days
- Lining — taffeta, polar fleece or mesh
- Trims & piping — tonal, contrast or off-white binding
- Zipper & hardware — vislon, reversed coil, custom pullers
- Branding — embroidery, woven patch or rubber badge
- Labels — woven neck label, size label, care label
- Hangtags & packaging — FSC card, polybag, custom carton
- Size set & grading — your tech pack or our block
01OEM Custom Espresso Brown Sherpa Hooded Jacket — Design & Features
Built for Cold-Weather Streetwear Drops
Built for cold-weather streetwear drops, the SP-01 Brown Sherpa Jacket layers a high-pile sherpa boucle over a relaxed oversized block. The espresso brown face reads as a warm neutral that pairs easily with denim, cargos, and tonal fleece, while the off-white contrast piping on the chest and sleeves sharpens the silhouette and gives the piece a clear, recognizable line on the rack.
We cut SP-01 from a single-bolt sherpa with a 460 GSM pile that holds loft after wash, then set it on a full zip with a chunky molded puller, a fixed lined hood with drawcords, slash hand pockets, and 2x2 rib at the cuffs and hem. As a wholesale sherpa jacket manufacturer, we adjust GSM, lining, hardware, label, and packaging to your program — no re-tooling needed between drops.
02OEM Custom Espresso Brown Sherpa Hooded Jacket — Detail Close-ups
Contrast Piping Detail
Off-white tubular piping runs from the chest down the raglan sleeve, giving the bulky sherpa a cleaner, more athletic line. It's a small touch that reads from the rack and lifts the whole piece above a generic sherpa hoodie.
Hood, Zip & Cuff Construction
The fixed hood is lined in the same sherpa face for a single-material read, the chunky molded zip runs clean to the chin, and the 2x2 rib at the cuffs and hem locks in warmth without breaking the oversized drape.
03OEM Custom Espresso Brown Sherpa Hooded Jacket — Material & Construction
| Fabric | High-pile sherpa fleece (polyester 100%) |
| Composition | 100% polyester sherpa boucle, 460 GSM |
| Color | Espresso Brown with off-white contrast piping |
| Hood | Fixed lined hood with drawcord adjusters |
| Closure | Chunky molded zip, full-front |
| Pockets | Two slash hand pockets, ribbed cuffs and hem |
| Care | Cold machine wash, line dry, do not bleach or iron |
Fabric & Build
SP-01 uses a 460 GSM high-pile polyester sherpa boucle selected for loft retention and a soft, low-shed hand. The face is brushed to keep fiber drop low; the back is finished smooth for comfortable wear over a tee or hoodie. Every bolt is inspected for color lot and pile height before cutting, and the lining is the same sherpa face so the jacket wears the same inside and out.
04OEM Custom Espresso Brown Sherpa Hooded Jacket — Side-By-Side Comparison
| Specification | SP-01 Espresso Brown Sherpa | Generic Sherpa Hoodie | Light Sherpa Hoodie |
|---|---|---|---|
| Pile Weight | 460 GSM | 220 GSM thin fleece | 320 GSM short-pile sherpa |
| Construction | Single-bolt, pre-shrunk, color-lot controlled | Open-market, mixed lots | Single-bolt, short pile |
| Hand Feel | High-pile soft, low-shed finish | Coarse, prone to fiber drop | Soft but flat |
| Care | Cold wash, line dry, no bleach or iron | Dry-clean recommended | Cold wash, tumble dry low |
All SP-01 Espresso Brown sherpa pieces are cut from a single-bolt, pre-shrunk, color-lot-controlled run, so the hand, weight, and shade stay consistent across re-orders.
05OEM Custom Espresso Brown Sherpa Hooded Jacket — Usage Scenarios
Urban Streetwear
Layered over a hoodie with cargos and sneakers for the core cold-weather streetwear look buyers re-order every season.
Coffee Run
Full-zip front and slash pockets make it easy to throw on for a quick morning stop without losing warmth on the way back.
Travel Layer
Lofted sherpa holds warmth in air-conditioned cabins and cool evenings, and packs down smaller than a wool coat of the same weight.
Co-Work / Studio
Neutral espresso brown reads well in studio and shop settings, and the relaxed cut fits easily over a crewneck or button-down.
Late-Night Walk
High-pile face and ribbed hem block wind better than a flat fleece, so it works as an outer layer down to about 5 degrees C with a base layer.
Weekend Trail
Sherpa face and fixed hood handle light wind and damp conditions on easy weekend trails, and the dark color hides dust and ground-in dirt.
06From Sampling to Bulk — OEM Sherpa Production Timeline
Five checkpoints, no black boxes. You approve at each stage before the next one starts.
- 1Tech pack & quotation1–2 days. You send the pack or a reference jacket; we return a costed quote with pile height and backing options.
- 2Fabric & trim sourcing3–5 days. Sherpa is knitted with an anti-pilling finish; GRS recycled option is prepared.
- 3Proto sample7–10 days. One jacket with a pilling-grade test so the surface stays clean through wear.
- 4PP sample & fit freeze3–5 days. Pile height and hand-feel are frozen before bulk.
- 5Bulk production35–45 days. Bonded or stitched trims, 8-step inspection to AQL 1.5 and packing.
07Brown Sherpa Jacket Manufacturer (Wholesale & Private Label)
Answers to the questions wholesale and private-label buyers ask before ordering a custom sherpa jacket — pile height, pilling, hood options and lead time.
What pile height and fabric do you use for sherpa?
100% polyester or recycled sherpa, 6–12 mm pile, brushed on the back for warmth. A GRS recycled option is available on request.
How do you control pilling and shedding?
An anti-pilling finish and OEKO-TEX tested backing keep the surface clean; the fabric is lab-tested to a 4–5 pilling grade through repeat wear.
Can sherpa be a hooded jacket like a fleece?
Yes. We build full-zip hooded sherpa jackets with rib or bound trims, and a sherpa-lined collar option for extra warmth at the neck.
What colours and branding work on sherpa?
Yarn-dyed or piece-dyed colour, embroidery, woven label and contrast backing are all supported; the pile takes embroidery cleanly with the right backing.
What is the MOQ and lead time for a custom sherpa jacket?
200 pieces per style per colour. Proto sample in 7–10 days; bulk production 35–45 days after PP approval.
08OEM Custom Espresso Brown Sherpa Hooded Jacket — Why Choose Us
200 pcs MOQ
Low minimum per color per style for OEM and private-label sherpa programs.
7-10 Days Sampling
Proto sample in 7-10 days after fabric and trims are confirmed.
AQL 1.5
Inline and final inspections follow AQL 1.5 with a full QC report.
35-45 Days Bulk
Bulk production in 35-45 days after PP sample sign-off, FOB Shenzhen.
Need a custom sherpa program with your own GSM, color block, pocket layout, and labels? Send your tech pack or reference sample and we will quote within 24 hours.
Request a Quotation About Our FactoryPile fabrics are OEKO-TEX tested with GRS recycled alternatives; BSCI (Grade B), ISO 9001 and OEKO-TEX 100 audits are shared before your first order.
- 加载中···
Start Your Custom Project
- Name
- Phone
- *Title
- *Content