Custom Wholesale Steel Blue Quilted Puffer Jacket Manufacturer | OEM Puffer Jacket factory
01OEM Custom Steel Blue Puffer Jacket — Design & Features
A lightweight steel blue quilted puffer built on a regular casual block — the cotton-filled baffle jacket that turns a wholesale blank into a custom streetwear layer.
Lightweight Cotton-Filled Quilted Block
The steel blue shell is quilted over a cotton-filled baffle on a regular casual block, so the jacket reads as a clean lightweight layer instead of a bulky winter coat.
The matte shell photographs cleanly under both natural and studio light, and the cotton fill gives a soft hand-feel that holds its loft through repeat wear instead of clumping like a cheap poly fill.
02OEM Custom Steel Blue Puffer Jacket — Detail Close-ups
The construction details that separate a retail-grade puffer jacket from a blank.
Front Logo Zip Placket & Lightweight Quilting
The front is built with a full-length zip and a branded logo pull at the placket, so the closure reads as an intentional brand detail rather than a generic wholesale zip.
The even quilt spacing keeps the cotton fill distributed across the body and sleeves, avoiding the cold spots and lumps that show up on low-cost puffers.
Baffle Stitch & Hem Finish
Each baffle is topstitched so the fill stays locked in place through wash and wear, holding the jacket's shape instead of drifting to the hem.
The hem sits at the hip with a clean lightweight band, letting the puffer layer over a tee or under a coat without adding winter bulk at the waist.
03OEM Custom Steel Blue Puffer Jacket — Material & Construction
The shell is knitted in our own mill from 100% polyester, then quilted over a cotton fill before cutting. We hold the baffle spacing and fill weight to tight tolerance so batch-to-batch warmth and drape stay consistent — the foundation of a retail-grade lightweight puffer.
| Shell | 100% Polyester, matte quilted |
| Fill | Cotton-filled baffles |
| Color | Steel Blue |
| Fit | Regular Casual, full-zip |
| Weight | Lightweight, transitional / mild winter |
| Pre-Treatment | Pre-shrunk shell, OEKO-TEX 100 trims |
Lightweight Cotton Hand-Feel
Cotton fill keeps a soft, natural loft through repeat wear instead of the synthetic clump of a budget poly puffer. The matte polyester shell balances retail-grade drape with easy care.
04OEM Custom Steel Blue Puffer Jacket — Side-By-Side Comparison
Three ways to run a quilted puffer jacket program — lightweight cotton-filled, padded winter, and waterproof streetwear — so your buyers can match warmth, shell, and weight to season and channel.
| Factor | Our Lightweight Cotton-Filled | Our Padded Winter Puffer | Our Waterproof Streetwear |
|---|---|---|---|
| Warmth & Fill | Lightweight cotton-filled baffles, warm for mild winter and transitional wear | Heavier poly-fill baffles, built for deep winter layering | Mid poly-fill with water-repellent shell, warm in wet-cold commute |
| Shell & Weather | Plain polyester shell, indoor and light-outdoor use | Brushed polyester shell, wind-resistant for cold dry days | Water-repellent polyester shell, sheds rain and snow |
| Weight & Packability | Lightest of the three, packs into a tote for travel | Heaviest, structured for standing cold | Mid-weight, folds for transit and commute |
| Front & Closure | Full-zip with branded front-logo pull, clean casual front | Full-zip with storm placket, hidden teeth | Full-zip with storm placket and logo zip pull |
| Colorfastness | Grade 4-5 reactive dye, ISO 105-C06 verified, holds through 20+ washes | Grade 4-5 reactive dye, same dye lot, holds through 20+ washes | Grade 4-5 reactive dye, ISO 105-C06, holds through 20+ washes |
| Detail Level | High — woven label, front-logo zip pull, coverstitch baffles | High — woven label, storm placket, coverstitch seams | High — logo zip pull, storm placket, coverstitch seams |
Our puffer program gives your brand one quilting story across three weights — lightweight cotton-filled for the casual drop, padded winter for the cold, waterproof for the commute — so a single source covers three seasonal SKUs.
05OEM Custom Steel Blue Puffer Jacket — Usage Scenarios
Where the steel blue lightweight quilted puffer lands across a wholesale brand's rotation — from casual drops to travel, commute, and content shoots.
Casual Streetwear Drops
The steel blue tone and clean quilted front read as a custom casual layer under natural and studio light, so the puffer drops straight into a seasonal release.
Layering Over Tees
Wears open over a printed tee or zipped as a light layer — the slim quilted front keeps the silhouette sharp, and the hip hem sits at the waistband.
Travel & Long Flights
The cotton fill breathes naturally on long flights, and the lightweight packable body folds into a tote without the bulk of a winter coat.
Transitional Commute
Lightweight warmth covers the mild-winter and shoulder-season commute, and the front-logo zip reads as a brand detail on the move.
Campus & Studio Wardrobe
Steel blue reads as a neutral in design studios, co-working spaces, and classrooms, so the puffer drops into a rotation without clashing with branded pieces.
Content & Product Photography
The matte steel blue surface holds color under strobes and continuous light, and the even quilting photographs cleanly in flat lays and on-figure shots.
06OEM Puffer Jacket Manufacturer (Wholesale & Private Label)
Answers to the questions wholesale and private-label buyers ask before placing a custom order — OEM, low MOQ, and full-service branding built in.
What is your Minimum Order Quantity (MOQ) per style?
Our standard MOQ is 100 pieces per style per color for custom streetwear such as hoodies, sweatshirts, and jackets. For technical outerwear and complex constructions, the MOQ is usually 200 pieces per style per color due to cutting and seam-taping setup. Smaller pilot runs of 50 to 80 pieces can be negotiated for established partners or sampling-to-production programs.
How does your sampling process work, and are samples charged?
Sampling follows three simple steps: (1) share your design, tech pack, or reference garment; (2) we develop a proto sample using your specified fabric and trims within 7 to 10 days; (3) you review and request revisions. The first proto sample carries a nominal fee that is deductible from your bulk deposit. Bulk production starts only after you approve the final sample.
Can you add our logo by embroidery or printing (OEM/ODM)?
Yes. We provide full OEM/ODM branding: embroidery (flat or 3D puff), screen printing, DTG, heat transfer, and woven labels. Share your logo file (AI, PDF, or PNG) and preferred placement. A pre-production branding sample is included in the sampling stage so you can verify stitch density, color accuracy, and placement before the bulk run.
What quality control and AQL standard do you follow?
Every order passes a four-stage QC process: incoming fabric inspection, in-line checking during production, final random inspection, and packing audit. We inspect to AQL 2.5 (major) and 4.0 (minor) by default, aligned with international retail standards. A full inspection report with photos is shared before shipment, and stricter AQL levels can be arranged on request.
How do you make sure the garments don't shrink or lose shape after washing?
All of our French Terry, ribbed, and stretch-knit fabrics go through a professional pre-shrinking and fabric stabilization process before cutting. We control washing shrinkage strictly within international standards, ensuring your fits look perfect and maintain their structure even after multiple commercial machine washes.
07OEM Custom Steel Blue Puffer Jacket — Why Choose Us
A factory-direct OEM partner for brands that need retail-grade lightweight puffer built to spec — not stock surplus dressed up as custom.
Ready to spec your custom steel blue lightweight quilted puffer? Send your tech pack or reference garment — we develop your proto sample within 7 to 10 days.
About Our Factory
- 加载中···
Start Your Custom Project
- Name
- Phone
- *Title
- *Content