Custom Wholesale Khaki Waterproof Quilted Puffer Jacket Manufacturer | OEM Puffer Jacket factory
01OEM Custom Khaki Puffer Jacket — Design & Features
A khaki warm waterproof quilted puffer built on a regular winter block — the streetwear outerwear layer that turns a wholesale blank into a custom cold-weather drop.
Waterproof Quilted Winter Block
The khaki shell is treated water-repellent and quilted over a poly fill on a regular winter block, so the jacket sheds rain and snow while keeping a clean streetwear silhouette.
The matte khaki surface photographs cleanly under both natural and studio light, and the even poly fill gives consistent warmth without the cold spots of a low-cost puffer.
02OEM Custom Khaki Puffer Jacket — Detail Close-ups
The construction details that separate a retail-grade puffer jacket from a blank.
Water-Repellent Shell & Storm Zip
The front is built with a full-length storm placket over the zip, so rain and wind are blocked at the closure instead of seeping through a bare zip line.
A branded logo zip pull keeps the look intentional and the open-and-close action smooth through repeat cycles, instead of the plastic pulls that snap on wholesale blanks.
Baffle Construction & Insulated Collar
Each baffle is topstitched so the poly fill stays locked in place through wash and wear, holding the jacket's shape instead of drifting to the hem.
The collar sits insulated at the neck so the puffer keeps warmth without a separate hood, reading as a minimal winter layer under coats and parkas.
03OEM Custom Khaki Puffer Jacket — Material & Construction
The shell is finished water-repellent in our own mill from polyester, then quilted over a poly fill before cutting. We hold the baffle spacing and fill weight to tight tolerance so batch-to-batch warmth and drape stay consistent — the foundation of a retail-grade winter puffer.
| Shell | Water-repellent Polyester, matte quilted |
| Fill | Polyester insulation |
| Color | Khaki |
| Fit | Regular Winter, full-zip |
| Weather | Water-repellent, wind-resistant |
| Pre-Treatment | Pre-shrunk shell, OEKO-TEX 100 trims |
Winter Warmth Hand-Feel
Poly fill keeps even warmth through repeat wear without the clumps of a budget puffer. The water-repellent shell balances streetwear drape with real wet-cold protection for the commute.
04OEM Custom Khaki Puffer Jacket — Side-By-Side Comparison
Three ways to run a warm quilted puffer program — waterproof streetwear, lightweight cotton-filled, and heavyweight down-look — so your buyers can match shell, warmth, and weight to season and channel.
| Factor | Our Waterproof Streetwear | Our Lightweight Cotton-Filled | Our Heavyweight Down-Look |
|---|---|---|---|
| Shell & Weather | Water-repellent polyester shell, sheds rain and snow | Plain polyester shell, indoor and light-outdoor use | Matte heavyweight shell, wind-resistant for deep cold |
| Warmth & Fill | Mid poly-fill, warm in wet-cold commute and winter street | Lightweight cotton-filled, mild winter and transitional | Heavy poly-fill, built for standing deep winter |
| Weight & Packability | Mid-weight, folds for transit and commute | Lightest, packs into a tote for travel | Heaviest, structured for standing cold |
| Front & Closure | Full-zip with storm placket and logo zip pull | Full-zip with branded front-logo pull, clean casual front | Full-zip with storm placket, hidden teeth |
| Colorfastness | Grade 4-5 reactive dye, ISO 105-C06 verified, holds through 20+ washes | Grade 4-5 reactive dye, same dye lot, holds through 20+ washes | Grade 4-5 reactive dye, ISO 105-C06, holds through 20+ washes |
| Detail Level | High — logo zip pull, storm placket, coverstitch seams | High — woven label, front-logo zip pull, coverstitch baffles | High — woven label, storm placket, coverstitch seams |
Our winter puffer program gives your brand one quilting story across three shells — waterproof for the commute, lightweight cotton-filled for the casual drop, down-look for the deep cold — so a single source covers three seasonal SKUs.
05OEM Custom Khaki Puffer Jacket — Usage Scenarios
Where the khaki warm waterproof quilted puffer lands across a wholesale brand's rotation — from winter streetwear drops to commute, travel, and content shoots.
Winter Streetwear Drops
The khaki tone and clean quilted front read as a custom winter layer under natural and studio light, so the puffer drops straight into a seasonal release.
Wet-Cold Commute
The water-repellent shell sheds rain and snow on the commute, and the insulated collar keeps warmth at the neck without a hood.
Travel & Long Flights
The poly fill packs light for transit, and the water-repellent shell shrugs off gate-side weather on winter trips.
Outdoor Off-Duty
Wind-resistant warmth covers the casual outdoor hour after the gym or on weekend errands — the kind of piece that earns repeat winter wear.
Campus & Studio Wardrobe
Khaki reads as a neutral in design studios, co-working spaces, and classrooms, so the puffer drops into a rotation without clashing with branded pieces.
Content & Product Photography
The matte khaki surface holds color under strobes and continuous light, and the even quilting photographs cleanly in flat lays and on-figure shots.
06OEM Puffer Jacket Manufacturer (Wholesale & Private Label)
Answers to the questions wholesale and private-label buyers ask before placing a custom order — OEM, low MOQ, and full-service branding built in.
What is your Minimum Order Quantity (MOQ) per style?
Our standard MOQ is 100 pieces per style per color for custom streetwear such as hoodies, sweatshirts, and jackets. For technical outerwear and complex constructions, the MOQ is usually 200 pieces per style per color due to cutting and seam-taping setup. Smaller pilot runs of 50 to 80 pieces can be negotiated for established partners or sampling-to-production programs.
How does your sampling process work, and are samples charged?
Sampling follows three simple steps: (1) share your design, tech pack, or reference garment; (2) we develop a proto sample using your specified fabric and trims within 7 to 10 days; (3) you review and request revisions. The first proto sample carries a nominal fee that is deductible from your bulk deposit. Bulk production starts only after you approve the final sample.
Can you add our logo by embroidery or printing (OEM/ODM)?
Yes. We provide full OEM/ODM branding: embroidery (flat or 3D puff), screen printing, DTG, heat transfer, and woven labels. Share your logo file (AI, PDF, or PNG) and preferred placement. A pre-production branding sample is included in the sampling stage so you can verify stitch density, color accuracy, and placement before the bulk run.
What quality control and AQL standard do you follow?
Every order passes a four-stage QC process: incoming fabric inspection, in-line checking during production, final random inspection, and packing audit. We inspect to AQL 2.5 (major) and 4.0 (minor) by default, aligned with international retail standards. A full inspection report with photos is shared before shipment, and stricter AQL levels can be arranged on request.
How do you make sure the garments don't shrink or lose shape after washing?
All of our French Terry, ribbed, and stretch-knit fabrics go through a professional pre-shrinking and fabric stabilization process before cutting. We control washing shrinkage strictly within international standards, ensuring your fits look perfect and maintain their structure even after multiple commercial machine washes.
07OEM Custom Khaki Puffer Jacket — Why Choose Us
A factory-direct OEM partner for brands that need retail-grade winter puffer built to spec — not stock surplus dressed up as custom.
Ready to spec your custom khaki warm waterproof quilted puffer? Send your tech pack or reference garment — we develop your proto sample within 7 to 10 days.
About Our Factory
- 加载中···
Start Your Custom Project
- Name
- Phone
- *Title
- *Content