Custom Wholesale Running Jacket Hooded | OEM Running Jacket Manufacturer
01OEM Custom Running Jacket — Design & Features
A 100% polyester hooded full-zip running jacket with a chest zip pocket, reflective taping, and a sleeve loop — engineered for low-light road miles and club training nights.
Low-Light Running Architecture
Reflective taping is set along the motion zones — sleeves and back — where a runner's movement catches headlights first. Placement is patterned, not printed on as an afterthought.
The black base keeps the reflective elements at maximum contrast, the configuration night-running clubs and event organizers specify most.
02OEM Custom Running Jacket — Detail Close-ups
The run-specific details that separate a running jacket from a generic windbreaker.
Chest Zip Pocket & Sleeve Loop
The chest zip pocket carries a phone flat against the body — no bounce at tempo pace. A sleeve loop holds the jacket secure around the waist when tied off mid-run.
Both details are placement-engineered for the running position, verified on fit models before the pattern is locked.
Hooded Full-Zip With Chin Guard
The hood sits close to the head so it does not catch wind at pace, and the full-zip front with chin guard manages temperature between warm-up and steady state.
Mesh-lined back venting dumps heat where a runner carries it — the upper back — without letting wind through the front face.
03OEM Custom Running Jacket — Material & Construction
The jacket uses a 100% polyester woven face chosen for zero-distraction wear: quiet at pace, light on the shoulders, and stable through the wash. Reflective tape is applied at seam level for durability — taping that survives the wash cycle is a spec, not a given, and it is verified on every lot.
| Fabric | 100% Polyester Woven |
| Color | Black |
| Fit | Athletic Regular |
| Reflectivity | Seam-level reflective taping, motion zones |
| Pockets | Chest zip phone pocket |
| Extras | Sleeve loop, chin guard, mesh back vent |
Reflective That Survives the Wash
Reflective performance is measured after wash cycles, not just new. Seam-level taping plus lot verification means the jacket still reads under headlights at the end of the season — the detail club and event buyers re-order on.
04OEM Custom Running Jacket — Side-By-Side Comparison
Three ways to run a running jacket program — matched to activity, fabric story, and channel.
| Factor | Our OEM Running Jacket | Our Lightweight Windbreaker | Our Ripstop Half-Zip |
|---|---|---|---|
| Low-Light Safety | Seam-level reflective taping on motion zones | No reflective program | No reflective program |
| Run-Specific Features | Chest phone pocket, sleeve loop, close-fit hood | Underarm vents, pack-into-pocket | Collar-stow hood, minimalist |
| Ventilation | Mesh back venting at heat zone | Underarm vents | Half-zip only |
| Pocket Program | Chest zip, bounce-free phone carry | Hand pockets | None (minimal trim) |
| Best For | Road running, clubs, night training | Trail, sun, travel | Trail, commute, workwear |
The running jacket is the safety-specced shell of the line: reflective where movement catches light, vented where runners carry heat, pocketed for the phone every runner carries.
05OEM Custom Running Jacket — Usage Scenarios
Where this layer lands across a wholesale brand’s season — from performance programs to everyday rotation.
Night & Pre-Dawn Runs
Seam-level reflective taping reads under headlights along the full stride arc — the core safety spec for winter training blocks.
Race Events & Clubs
Chest-pocket phone carry and a black reflective base make it the standard club training jacket — sponsor logos print cleanly on the panels.
Tempo & Interval Sessions
Full-zip temperature control and mesh back venting handle the warm-up to interval swing without a wardrobe change.
Shoulder-Season Racing
Light wind-blocking face for race-morning chill, packable enough to hand off or tie at the waist with the sleeve loop.
Urban Commute (Night)
The reflective program and clean black silhouette transition from training to commute — visibility where it matters, no hi-viz aesthetic.
Campaign & Team Kit Shoots
Sponsor chest placement sits above the zip pocket line, and reflective taping photographs as a design feature in low-light campaign shots.
06Running Jacket Manufacturer (Wholesale & Private Label)
Answers to the questions wholesale and private-label buyers ask before placing a custom order — OEM, low MOQ, and full-service branding built in.
Can we customize the reflective placement and add our club branding?
Yes. Reflective taping can be repositioned to your kit design within the motion zones, and chest, back, and sleeve panels all accept sponsor printing and embroidery. We confirm tape placement and branding together on the tech pack before sampling.
What reflective standards can you meet?
Seam-level reflective taping is verified for brightness after wash cycles on every lot. If your program requires certified hi-visibility standards (e.g. EN ISO 20471), we quote certified tape and garment testing at tech pack stage.
What is the MOQ and sampling process?
MOQ is 100 pieces per style per color. Proto samples are developed within 7 to 10 days from your tech pack or reference garment; the proto fee is deductible from the bulk deposit, and bulk runs 25 to 35 days after approval.
How is the phone pocket engineered against bounce?
The chest pocket positions the phone flat against the sternum with a bonded zipper, keeping the load stable at tempo pace. Placement is verified on fit models before the pattern is locked — we recommend testing it on your proto sample.
What are your wholesale and shipping terms?
50% deposit, balance before shipment, by T/T or L/C. Orders ship FOB Shenzhen. Every order passes four-stage QC with final random inspection to AQL 2.5 major / 4.0 minor and a photo report before shipment.
07OEM Custom Running Jacket — Why Choose Us
A factory-direct OEM partner for brands that need retail-grade running jacket built to spec — not stock surplus dressed up as custom.
Ready to spec your custom running jacket? Send your tech pack or reference garment — we develop your proto sample within 7 to 10 days.
About Our Factory
- 加载中···
Start Your Custom Project
- Name
- Phone
- *Title
- *Content