Custom Wholesale Ripstop Windbreaker Pullover | OEM Ripstop Windbreaker Manufacturer
01OEM Custom Ripstop Half-Zip Pullover — Design & Features
A 100% nylon ripstop half-zip pullover with a packable hood and water-resistant shell — the minimalist layer for trail, commute, and everything that snags.
Ripstop Grid Architecture
The ripstop nylon weave interlocks reinforcement threads in a grid, so a puncture or snag stops at the square instead of running — the reason ripstop is the default fabric for trail and workwear programs.
The black colorway is cut on an athletic regular block that reads equally at a trailhead and a city commute.
02OEM Custom Ripstop Half-Zip Pullover — Detail Close-ups
Two engineering choices that define a packable shell.
Packable Hood System
The hood stows into the collar for a clean neck line and deploys in one pull when weather turns — no loose hood flopping through the commute.
The half-zip opening vents heat on climbs while keeping the pullover silhouette intact for everyday wear.
Water-Resistant Face & Minimal Trim
The woven face sheds light rain and drizzle long enough to get you under cover, and dries fast after.
Trim count is deliberately low: one zip, no external pockets to snag, bonded seams where possible — weight and bulk stay minimal for packing.
03OEM Custom Ripstop Half-Zip Pullover — Material & Construction
The shell uses a mill-sourced 100% nylon ripstop with a water-resistant finish. We verify the grid density and finish on every lot, because ripstop performance lives or dies at the weave — a loose grid is just nylon. Lots are checked for colorfastness and finish durability before cutting.
| Fabric | 100% Nylon Ripstop |
| Finish | Water-resistant face |
| Color | Black |
| Fit | Athletic Regular |
| Opening | Half-zip with collar-stow hood |
| Seams | Bonded finish, minimal trim |
Why Ripstop, Specifically
A plain nylon shell fails at the first branch or zipper scratch. The ripstop grid contains the damage, which is why the fabric is specified for trail running, sailing, and workwear — programs where the garment takes real contact.
04OEM Custom Ripstop Half-Zip Pullover — Side-By-Side Comparison
Three ways to run a ripstop windbreaker program — matched to activity, fabric story, and channel.
| Factor | Our OEM Ripstop Half-Zip | Our Lightweight Windbreaker | Our Oversized Windbreaker |
|---|---|---|---|
| Fabric Strength | Ripstop grid, snag and tear resistant | Plain woven polyester, lighter but less snag-proof | Plain nylon, general durability |
| Opening & Venting | Half-zip, moderate venting, pullover silhouette | Full-zip with underarm vents, maximum venting | Full-zip, relaxed venting through fit |
| Weather Role | Light rain and abrasion protection | Sun and wind protection | Wind protection with coverage |
| Fit Story | Athletic regular, minimalist | Athletic regular, performance | Oversized streetwear block |
| Packing | Packs flat, collar-stow hood | Packs into own pocket | Worn as statement piece, not packed |
Ripstop for durability, featherweight for sun, oversized for street — three shells from one factory, each solving a different failure mode of the other two.
05OEM Custom Ripstop Half-Zip Pullover — Usage Scenarios
Where this layer lands across a wholesale brand’s season — from performance programs to everyday rotation.
Trail & Fell Running
The ripstop grid shrugs off branches and rock scrapes, and the water-resistant face handles summit drizzle.
City Commute
The clean black silhouette and collar-stow hood read as everyday outerwear — no technical clutter on the train platform.
Pack-It Travel
Minimal trim and a flat-packing build make it the jacket that lives in the carry-on until needed.
Workwear & Site Visits
Snag resistance earns its keep around tools, pallets, and hardware — a quiet performance spec for B2B programs.
Shoulder-Season Layering
Half-zip venting manages body heat between buildings and open air, over a tee or the mixed-fabric pullover.
Uniform & Minimalist Drops
One colorway, one zip, no pockets — the blank canvas that carries a single chest logo with maximum presence.
06Ripstop Windbreaker Manufacturer (Wholesale & Private Label)
Answers to the questions wholesale and private-label buyers ask before placing a custom order — OEM, low MOQ, and full-service branding built in.
Can we get this ripstop shell in colors beyond black?
Yes. Black is the stock reference for its uniform and minimalist demand, but the ripstop nylon takes custom dye lots from 100 pieces per style per color. We can also quote camo prints and two-tone panel programs.
What finish levels are available — water-resistant vs waterproof?
The stock finish is water-resistant (sheds light rain and drizzle). Fully waterproof construction with taped seams is quoted as a technical upgrade at tech pack stage; MOQ for taped-seam programs is typically 200 pieces per style.
How does the collar-stow hood hold up in production?
The hood rolls into a structured collar with an internal stow channel — the pattern is engineered so the collar keeps its shape whether the hood is in or out. We verify deployment and stow on the proto sample.
What is the MOQ, sampling, and lead time?
MOQ is 100 pieces per style per color for the standard finish. Proto samples in 7 to 10 days; bulk production 25 to 35 days after sample approval.
What QC standard applies to ripstop shells?
Four-stage QC including final random inspection to AQL 2.5 major / 4.0 minor. For ripstop we additionally verify grid integrity and finish durability on incoming lots. Payment is 50% deposit, balance before shipment, T/T or L/C, FOB Shenzhen.
07OEM Custom Ripstop Half-Zip Pullover — Why Choose Us
A factory-direct OEM partner for brands that need retail-grade ripstop windbreaker built to spec — not stock surplus dressed up as custom.
Ready to spec your custom ripstop windbreaker? Send your tech pack or reference garment — we develop your proto sample within 7 to 10 days.
About Our Factory
- 加载中···
Start Your Custom Project
- Name
- Phone
- *Title
- *Content