Custom Wholesale Brown Color Block Oversized Hoodie | ODM Hoodie Manufacturer
01OEM Custom Dark Brown/Tan/Coffee Color Block Hoodie — Design & Features
A multi-panel color-block hoodie in 350GSM French Terry, with an integrated kangaroo pocket and matching tracksuit availability for capsule drops.
Multi-Panel Hoodie with Kangaroo Pocket
The 350GSM French Terry hoodie pairs a dark-brown / tan / coffee color-block front with a roomy kangaroo pocket, all cut on an oversized drop-shoulder block.
The double-ply hood and coverstitched seams give the panel joins a finished, retail-grade edge — and the same colorway is available as a matching tracksuit for coordinated capsule drops.
02OEM Custom Dark Brown/Tan/Coffee Color Block Hoodie — Detail Close-ups
The construction details that separate a retail-grade hoodie from a blank.
Color-Block & Kangaroo Pocket
The front color-block flows into a single kangaroo pocket panel, so the pocket reads as part of the color story rather than an add-on.
Panel joins are coverstitched on flat-lock for a retail-grade finish that survives bulk washing.
Double-Ply Hood
The hood is built double-ply in the same 350GSM French Terry, with coverstitched edges that hold their shape instead of curling.
A self-fabric drawcord (OEKO-TEX) keeps the look clean and the trim compliant for destination markets.
03OEM Custom Dark Brown/Tan/Coffee Color Block Hoodie — Material & Construction
The 350GSM French Terry is spun and knitted in-house, then mill-stage pre-shrunk before cutting. We hold the 80/20 cotton-poly blend to tight tolerance so batch-to-batch color and hand-feel stay consistent — the foundation of a retail-grade hoodie.
| Fabric | 350GSM French Terry |
| Composition | 80% Cotton / 20% Polyester |
| Color | Dark Brown / Tan / Coffee Block |
| Fit | Oversized Drop-Shoulder |
| Knit / Texture | French Terry, loop-back interior |
| Pre-Treatment | Mill-stage pre-shrunk, OEKO-TEX 100 trims |
Panel-Flow French Terry
The loop-back French Terry interior traps warmth without weight, and the dark-brown / tan / coffee panels are yarn-matched so the block stays crisp through repeat commercial washes. The smooth face layers cleanly under jackets and coats.
04OEM Custom Dark Brown/Tan/Coffee Color Block Hoodie — Side-By-Side Comparison
Three ways to run the same dark-brown / tan / coffee color-block program — hoodie, crewneck, and zip-up — so your buyers can match hood, pocket, and opening to the drop.
| Factor | Our OEM Custom | Our Color Block Crewneck | Our Color Block Zip-Up |
|---|---|---|---|
| Hood & Pocket | Double-ply hood + integrated kangaroo pocket, both part of the color story | No hood, 2x2 rib crewneck collar, no front pocket | Full-zip stand collar + zip pocket, clean lined placket |
| Panel Integration | 3+ panel block flowing into a single kangaroo pocket panel, retail-integrated | 3-panel front color block, separate rib collar | 3-panel block flowing into the zip placket, clean finish |
| Matching Tracksuit Availability | Same colorway & dye lot available as a matching tracksuit (jogger + tee) | Top-only, no coordinated bottom | Top-only, no matching program |
| Silhouette | Oversized drop-shoulder block, 350GSM, retail-graded across S-XXL | Relaxed drop-shoulder, slightly lighter feel without the hood | Slightly trimmer relaxed block for a cleaner zip-up line |
| Pre-Shrink & Colorfastness | Mill-stage pre-shrunk <=3%; Grade 4-5 reactive dye, ISO 105-C06 per panel, color holds | Same pre-shrink and colorfastness spec as the hoodie version | Same pre-shrink and colorfastness spec as the hoodie version |
| Detail Level | High — coverstitched panels, OEKO-TEX drawcord, woven label | High — coverstitched panels, rib collar, woven label | High — coverstitched panels, branded zip pull, woven label |
Our color-block program gives your brand one panel story across three openings, and the hoodie version adds a matching tracksuit from the same dye lot — so a single colorway serves a full capsule.
05OEM Custom Dark Brown/Tan/Coffee Color Block Hoodie — Usage Scenarios
Where the color-block oversized hoodie lands across a wholesale brand’s rotation — from capsule launches to coordinated sets, travel, and content shoots.
Color-Block Capsule Launch
The panel color story reads as instant brand identity, so the hoodie anchors a capsule line without extra prints or embroidery.
Coordinated Tracksuit Sets
The same colorway is offered as a matching tracksuit, so brands can launch a coordinated top-and-bottom set from one spec.
Athleisure Off-Duty
The loop-back interior keeps the body comfortable during warm-up and cool-down, and the relaxed block earns repeat off-duty wear.
Travel & Commute
The oversized drop-shoulder cut layers over tees and under outerwear, and packs without losing its shape after a long trip.
Campus & Studio Wardrobe
The brown neutral drops into a rotation without clashing with tailored or branded pieces in classrooms and studios.
Campaign & Content Shoot
The panel block holds contrast under strobes and continuous light, so the hoodie photographs with clean separation on-figure.
06OEM Hoodie Manufacturer (Wholesale & Private Label)
Answers to the questions wholesale and private-label buyers ask before placing a custom order — OEM, low MOQ, and full-service branding built in.
What is your Minimum Order Quantity (MOQ) per style?
Our standard MOQ is 100 pieces per style per color for custom streetwear such as hoodies, sweatshirts, and jackets. For technical outerwear and complex constructions, the MOQ is usually 200 pieces per style per color due to cutting and seam-taping setup. Smaller pilot runs of 50 to 80 pieces can be negotiated for established partners or sampling-to-production programs.
How does your sampling process work, and are samples charged?
Sampling follows three simple steps: (1) share your design, tech pack, or reference garment; (2) we develop a proto sample using your specified fabric and trims within 7 to 10 days; (3) you review and request revisions. The first proto sample carries a nominal fee that is deductible from your bulk deposit. Bulk production starts only after you approve the final sample.
Can you add our logo by embroidery or printing (OEM/ODM)?
Yes. We provide full OEM/ODM branding: embroidery (flat or 3D puff), screen printing, DTG, heat transfer, and woven labels. Share your logo file (AI, PDF, or PNG) and preferred placement. A pre-production branding sample is included in the sampling stage so you can verify stitch density, color accuracy, and placement before the bulk run.
What quality control and AQL standard do you follow?
Every order passes a four-stage QC process: incoming fabric inspection, in-line checking during production, final random inspection, and packing audit. We inspect to AQL 2.5 (major) and 4.0 (minor) by default, aligned with international retail standards. A full inspection report with photos is shared before shipment, and stricter AQL levels can be arranged on request.
How do you make sure the garments don't shrink or lose shape after washing?
All of our French Terry, ribbed, and stretch-knit fabrics go through a professional pre-shrinking and fabric stabilization process before cutting. We control washing shrinkage strictly within international standards, ensuring your fits look perfect and maintain their structure even after multiple commercial machine washes.
07OEM Custom Dark Brown/Tan/Coffee Color Block Hoodie — Why Choose Us
A factory-direct OEM partner for brands that need retail-grade hoodie built to spec — not stock surplus dressed up as custom.
Ready to spec your custom dark brown/tan/coffee color block hoodie? Send your tech pack or reference garment — we develop your proto sample within 7 to 10 days.
About Our Factory
- 加载中···
Start Your Custom Project
- Name
- Phone
- *Title
- *Content